How hard is a gear install?
#11
I believe brenspeed installed mine for around 500 but to me it was worth it. Hell they are in my back yard so if there was a problem then they would have taken care of it. If your capable then by all means do it. Just be exact in your measurements and good luck
#12
Exact in your measurements . . . and patient, and willing to re-shim and re-measure as many times as it takes.
gmoran - I'm surprised that you don't do your own alignments if you're considering DIY'ing gears. Once you can do the measuring, the rest is mostly just moving things a little and doing a little basic wrench-work.
Norm
gmoran - I'm surprised that you don't do your own alignments if you're considering DIY'ing gears. Once you can do the measuring, the rest is mostly just moving things a little and doing a little basic wrench-work.
Norm
Thread
Thread Starter
Forum
Replies
Last Post