4.6L (1996-2004 Modular) MustangTechnical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within. Sponsored by Cruizin Concepts
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Just thought i would post up some useful information for all you guys wanting to do that 03 04 cobra bumper on your gt.
Will the bumper fit on my 99-04 GT?
Yes it will fit... however you need to drill the mounting holes in the engine bay about 2 or so inches back so that the hood will close without binding
Where can i find a cobra bumper?
The cheapest and easiest way to get one painted is off of ebay. they sell them for 290 bucks plus shipping painted to match your car.
What else do i need?
You will need a right and left bezel, 2 fog lights, 2 brackets and 2 H10 pigtail connectors as well as 2 H10 fog light bulbs. (See note below)
Where can i get all this stuff?
www.latemodelrestoration has all of it. however you can get the pigtails and foglights at just about any auto parts store for 5 bucks a pigtail.
Something i figured out was that H10, 9145 and 9005 are all EXACTLY the SAME!!!! im not sure why there are so many different names for them but when i did my bumper swap i bought a 9005 pigtail with some 9145 silverstars and it hooked up perfectly.
Hope all of this helps
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
just a quick question...I've got the bezels and the foglights and the pigtails sitting in front of me. What kind of screws would I use to mount the bezels to the bumper once it arrives? (hopefuly 5-10 days from now). Also, what does the foglight mount to, the bumper side or the car side? what kind of screws would i need for that? I think this bumper setup is going to look amazing with my hood pins and shaker hood, just worried about fitament issues. i'm already aware of the inch i have to take off the front fiberglass cowl and having to drill the holes an inch further back. any input would be helpful!
2011 Ford Mustang GT/CS - H&R Super Sport Lowering Springs, Hurst Plus 2 Short Throw Shifter, Flowmaster American Thunder Axle Back Mufflers, 93 octane BAMA cam tune, O/R H-pipe, Functional Hood Pins, more to come...
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor