Power Window Stuck
#1
Power Window Stuck
Hello All,
I rolled the window down, and it will come back up maybe 1/4 inch, but gets stuck. I removed the door panel, and it would appear that the black bracket in the video is missin a screw, or the adhesive came off? Also should the assembly be cantered like that as it rolls up? Any input is welcome as I just purchased the 02 GT and am new to stangs.
Here is a link to the video.
I rolled the window down, and it will come back up maybe 1/4 inch, but gets stuck. I removed the door panel, and it would appear that the black bracket in the video is missin a screw, or the adhesive came off? Also should the assembly be cantered like that as it rolls up? Any input is welcome as I just purchased the 02 GT and am new to stangs.
Here is a link to the video.
#2
I’d advise pulling the door panel on the other side and comparing the operation of the two window regulators. It seems to me that the mounting bracket that attaches to the window glass is either broken or came loose. Its hard to say without pulling the window & window regulator. Its not a complicated job. Good luck...
Thread
Thread Starter
Forum
Replies
Last Post
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
09-26-2015 02:11 PM
wishinsky
2010-current S197 Appearance Section
1
09-21-2015 09:48 AM
mrmrultimate
Texas Regional Chapter
2
09-10-2015 09:43 AM