"New" Prestone 50/50 prediluted coolant
#1
"New" Prestone 50/50 prediluted coolant
I'm not sure if this is the right place to post this question, and it may have already been answered as I didn't take the time to do a thorough search.
Does anyone know if the "New" Prestone 50/50 prediluted coolant is OK to use in our Mustang GTs with aluminum heads or blocks/heads? I've used it to top off the existing coolant after replacing the upper radiator hose, but I'm not sure if it's 'good' for aluminum. The container states:
Any enlightenment on the subject will be appreciated.
Does anyone know if the "New" Prestone 50/50 prediluted coolant is OK to use in our Mustang GTs with aluminum heads or blocks/heads? I've used it to top off the existing coolant after replacing the upper radiator hose, but I'm not sure if it's 'good' for aluminum. The container states:
- For ANY car or light duty truck
- Works with ANY color antifreeze
- Will NOT void warranty
- Up to 5 years or 150,000 miles of protection
Any enlightenment on the subject will be appreciated.
#2
Looks like I just found the answer to my own question - guess I should have gone to the Prestone site to start with.
http://prestone.com/enca/products/an...t/product_list
http://prestone.com/enca/products/an...t/product_list
#3
Glad you found your answer, But another answer is that when I needed new coolant (oil cooler install) I just went to Ford and got what they recommended. It may have cost more but to me it was worth it to make sure nothing is going to damage to my engine.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM