88' GT weld wheel backspace?
#1
88' GT weld wheel backspace?
Im lookin for some new weld draglites for the front. 15x7's but im not sure what the backspacing should be. I have looked around and i see 3 1/2 for the most part but I also occasionaly see 4 1/2 as well. Anyone know what will fit without any of the wheel or tire sticking outside of the wheel well.
#2
RE: 88' GT weld wheel backspace?
up front the "typical" mustang owner when slapping on some drag lites uses
15x3.5 up front w/ a 165rx15 Kuhmo front runner (which is hard to come by)
on the rear 15x7 w/ 5.5" of backspc..... At least thats what i have on my car... and nope, my et/streets do not stick out of the fender well 'maybe a 1/8 inch or so'....
15x3.5 up front w/ a 165rx15 Kuhmo front runner (which is hard to come by)
on the rear 15x7 w/ 5.5" of backspc..... At least thats what i have on my car... and nope, my et/streets do not stick out of the fender well 'maybe a 1/8 inch or so'....
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM