mikesr4565

I have been told different ways to first reset then re-learn my A9L computer. Can you guys help me out with the proper way of doing this??? Thank you

88 orangepeel notch

Just disconnect the battery for 5-10 min.

Reconnect, start car and drive it. That's it.

What's your car doing that makes you think the ECM has bad info? Or is this after a new modification you made?

Either way, good luck.

mikesr4565

i have done some new mods. Changed fuel injectors,maf,cold intake. Also my car didn't come with the A9L. I was told you have to disconnect battery with head light switch on for 30 min to truly reset the computer. Then run through a series of different processes to learn it

bluebeastsrt

I'd be interested in hearing these processes you speak of.

mikesr4565

disconnect battery with headlight switch on for 30 minutes
start and idle for 1 min
shut of 10 sec
start engine with all acc. on and idle for 1 min
turn everything off and wait 10 sec
start and hold at 2000rpm for 1 min
shut of for 10 sec
start engine with all acc. on at 2000rpm for 1 min

bluebeastsrt

Never heard that before. You might want to message 64bit or mjr64. They probably have a better understanding of the tuning than most.

mikesr4565

ok thank you

mjr46

do a base idle reset after disconnecting battery.....that is if you are trying to reset idle...if not just go drive the car for 20-30 min the KAM will update enough to learn drivibility in that period and will continue to do so the more it is driven under varying circumstances