4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Shop charged me 622$ for labor on my gears. what do i do? and what are my options?

Thread Tools
 
Search this Thread
 
Old Sep 2, 2009 | 07:02 PM
  #41  
P.S.I.cho's Avatar
P.S.I.cho
4th Gear Member
 
Joined: Mar 2005
Posts: 1,123
From:
Default

if book time is 4-5 hours and they charged you $622 for labor seems about right as JR said as well as other people, you grenaded this thing and there was extra work apart from book time, even cutting the bearing off to not damage the bearing surface they could of charged an extra .5-.8 hours maybe even a full hour. i imagine they took some warpage measurements which are out of book time as well. plus wheel bearings and seals. doesnt sound like u got a bad deal but more so lack of communication.
Old Sep 3, 2009 | 09:16 AM
  #42  
ChalknCover's Avatar
ChalknCover
Sgt. Killjoy
 
Joined: Sep 2008
Posts: 2,090
From: DMV
Default

After reading the last OP post, I have to say it does sound fair now. It just wasn't a gear swap, it was a repair, which def would allow over book time. And it is one of those things, they wouldn't really know how bad it is until they get into it. The only fault I could find with the shop is they didn't call to tell you there would be and increase and why. Other than that, $600 isn't that bad for what was done.
Old Sep 3, 2009 | 09:40 AM
  #43  
Blk003GT's Avatar
Blk003GT
Thread Starter
4th Gear Member
 
Joined: Apr 2008
Posts: 1,086
From: mi
Default

there was no real damage to the housing just it ate into it a little bit. they never said they did any checking or anything of the sort. i finnaly got ahold of the guy and he said he was going to check with his mechanic and call me back the next day and once again i never recieved a phone call from him. i took the pictures and pinion to another shop that charges 250$ for labor and they said that they still would have charged 250$ for labor it was no big deal.
Old Sep 3, 2009 | 10:23 AM
  #44  
jrherald420's Avatar
jrherald420
5th Gear Member
 
Joined: May 2007
Posts: 4,524
From: Smyrna, TN
Default

sounds like you took it to the wrong place, lesson learned/ end thread.
Old Sep 3, 2009 | 10:44 AM
  #45  
2011Black5.0's Avatar
2011Black5.0
4th Gear Member
 
Joined: Feb 2009
Posts: 1,685
From: SoCal
Default

I paid $650 for a gear install and I supplied everything but they had to undo and redo my watts link which takes about an hour each way
Old Sep 8, 2009 | 11:34 AM
  #46  
Blk003GT's Avatar
Blk003GT
Thread Starter
4th Gear Member
 
Joined: Apr 2008
Posts: 1,086
From: mi
Default

new update is got ahold of the guy and then he never called me back (sick of playing games where i can't contact him and he is avoiding me) so i now have a JAG (army lawyer) attourney who is handling it and is in contact with them. he says its a winable case for me so we will see how it goes. just thought id update.
Old Sep 8, 2009 | 12:09 PM
  #47  
jrherald420's Avatar
jrherald420
5th Gear Member
 
Joined: May 2007
Posts: 4,524
From: Smyrna, TN
Default

good luck, if you were not in the service you would not have a chance on winning this case.
Old Sep 8, 2009 | 03:10 PM
  #48  
DS002's Avatar
DS002
3rd Gear Member
 
Joined: Sep 2006
Posts: 936
From:
Default

Originally Posted by jrherald420
good luck, if you were not in the service you would not have a chance on winning this case.
I still dont think he has a chance in hell, theres nothing in writing. Unless the judge sides with the lawyer just because he's a military attorney, which would be nothing short of complete BS.
Old Sep 8, 2009 | 03:11 PM
  #49  
2011Black5.0's Avatar
2011Black5.0
4th Gear Member
 
Joined: Feb 2009
Posts: 1,685
From: SoCal
Default

good luck, hope it works out for you
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
bradleyb
Classic Mustangs (Tech)
3
Nov 27, 2015 07:50 PM
ChampInSD
5.0L GT S550 Tech
13
Oct 2, 2015 04:55 AM
bradleyb
California Regional Chapter
0
Oct 1, 2015 01:02 AM
GLOCKer
General Tech
0
Sep 28, 2015 07:36 AM




All times are GMT -5. The time now is 10:49 PM.