r34p3r

can i use the accufab 75mm throttle body and plenumon my bullitt. here is the link to the throttle body i want. responses are greatly apreciated.

http://www.americanmuscle.com/ac42v75thbop.html

Donnie's GTS

what for? u do realize bullits have a dual 57mm throttle body stock right?

r34p3r

so if i lose the 58mm twin bore, then i would be losing. this is the first mustang i've ever owned. and i thought it was just a gt until i got my insurance card.

Donnie's GTS

yea, it would be a downgrade and a half to switch out everything for that throttle body, and insurance shouldn't be different from a gt.

DiZzyBonne

You realize how special and unique our intakes/throttle boddiesare?

http://www.staphonline.com/images/bullitt/bullitt01.jpgvs http://www.mustangspecs.com/carpics/02gteng1.jpg

GT owners pay upwards to $1000 for our intakes, so unless you're looking to profit, I personally say keep it. Hell, I'm getting blown by Kenne Bell ([sm=lol.gif])and I'm STILL gonna keep my intake, not sell it! I'll just put it in a box for safe keeping just to keep it lol.

Mikestang415

Acufab makes a throttle body for the Bullitt http://www.stangsuspension.com/store...idproduct=1614
Try this one

nolimitsoldierz77

Mikestang415 is right you can also find the acufab single blade TB at american muscle. Though the intake will require a little modification to allow the single blade to open. Make sure when you cut the middle piece out from the intake you have rags stuffed inside so you don't get metal flakes sucked into the intake. I used a grinder to clear out the middle bar and the Acufab TB works great. I'll post some pics later to show you or you can email me for them.

NeedStangSpeed

I got the accufab single blade TB and I did lose a little initatial tq on it, but it makes up for it big time when it hits 2500 RPMs.