Heater Hoses
#1
Heater Hoses
Hi Guys,
I have recently bought a 66 Mustang with a 302W. The guy that owned it before me was in the process of detailing the engine bay with all braided hoses but never got around to the heater hoses. I was wondering if someone had some photos of how their mustang's heater hoses connects from the firewall to the engine block.
Thanks in advance.
Cheers
Jeff
I have recently bought a 66 Mustang with a 302W. The guy that owned it before me was in the process of detailing the engine bay with all braided hoses but never got around to the heater hoses. I was wondering if someone had some photos of how their mustang's heater hoses connects from the firewall to the engine block.
Thanks in advance.
Cheers
Jeff
#2
RE: Heater Hoses
basically you have a heater hose from the water pump to the heater core connection at the firewall, connect it to the nipple closest to the drivers side of the car. Run a smaller heater hose from the other heater core connection up to the heater control valve above, connecting it to the nipple facing the drivers side. THen run a hose from the remaining heater core connection back up to the front of the engine, connecting at the intake manifold above the thermostat housing.
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM