Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Engine Noise

Thread Tools
 
Search this Thread
 
Old 09-03-2012, 07:37 PM
  #1  
Stangman70
2nd Gear Member
Thread Starter
 
Stangman70's Avatar
 
Join Date: May 2008
Location: Washington
Posts: 323
Default Engine Noise

So after getting my power brakes installed on my coupe I go out to the garage to continue to break in the pads and I turn my car over and am greeted with this obnoxious noise! I am pretty sure that it is a lifter or a push rod not sure which. Any insightful ears are appreciated.

http://youtu.be/-zBbKrTIsLc
Stangman70 is offline  
Old 09-03-2012, 08:13 PM
  #2  
Gun Jam
Moderator
 
Gun Jam's Avatar
 
Join Date: Dec 2005
Location: Hills of California
Posts: 5,208
Default

Yep thats a safe bet.

I had the same issue I used one of the mechanic stethoscopes to locate the source of the clicking. It worked very well I simply placed the probe against the valve cover and moved along the lenght of the cover until I could hear the clicking through the stethoscope. Pulled the cover off and found a rocker arm flopping around and a bent pushrod.

I would not drive it until you can id and repair the issue. I let mine go too long and it damaged the valve stem.

-Gun
Gun Jam is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nick Oliver
V6 S197 General Discussion
6
10-17-2018 04:22 AM
bjdutch2005
2005-2014 Mustangs
10
03-24-2017 03:38 AM
Pyrate Dave
5.0L (1979-1995) Mustang
8
09-10-2015 07:30 PM
Emblazoned
General Tech
0
09-03-2015 10:45 PM



Quick Reply: Engine Noise



All times are GMT -5. The time now is 11:17 AM.