How do I unplug tail lights from headlight harness
#1
How do I unplug tail lights from headlight harness
Howdy,
I have pulled, pryed, even used a blade to cut along the lines in the black connector that plugs the tail light harness onto the headlight harness. I am just about ready to cut the wires and add some new connectors. I figure if it's happy to stay stuck together, then fine!
So, is there something I'm missing? Some sort of release? Or has age just locked it together?
I have pulled, pryed, even used a blade to cut along the lines in the black connector that plugs the tail light harness onto the headlight harness. I am just about ready to cut the wires and add some new connectors. I figure if it's happy to stay stuck together, then fine!
So, is there something I'm missing? Some sort of release? Or has age just locked it together?
#2
Foghorn Leghorn
Join Date: Dec 2006
Location: I reside in a near constant state of amazment.
Posts: 2,923
For the love of God don't cut your factory harness.
You're talking about the black rubber connectors I suppose.
Spray the connector with some weasel **** and let it sit for a while. If you still can't pull them apart then take two pair of pliers (for leverage), grab each side of the connection and GENTLY wriggle them. Don't be ham-handed and crush them or snap off the leads.
You're talking about the black rubber connectors I suppose.
Spray the connector with some weasel **** and let it sit for a while. If you still can't pull them apart then take two pair of pliers (for leverage), grab each side of the connection and GENTLY wriggle them. Don't be ham-handed and crush them or snap off the leads.
Last edited by fastbackford351; 08-27-2013 at 11:00 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Seanam
V6 S197 General Discussion
5
10-04-2015 10:15 AM