SVTcontourSVT

I have a 01 mustang and ran into a real pita problem. I'm trying to replace the plastic headlight **** with a billet one. It had looked like my **** had been messed with by the guy I bought it from because the slit was on the opposite side as all three "how to's" where positioned. Basically after 30 minutes of tying to get the **** to unpressure fit, I realized this thing isnt coming off. Frusturation got the best of me and I just ended up hacking off as much of the plastic, that gets pushed back into the dash as I could, hoping I would see this clip that needs to get pushed in order for me to pop the **** off. This led to absolutely nothing. What are my options? Should I just cut the metal bar and try and track down a new one, because surely this **** isnt coming off any other waybecause I've tried everything. Here are three how to's so you know what im talking about. Thanks

One I used: http://www.americanmuscle.com/mustan...es-how-to.html

2. http://www.bullittarchive.com/1000.htm (3rd row down)
3. http://www.stangnet.com/reviews/macgauge.html

bighvygt

i had the same problem go here: https://mustangforums.com/m_4159806/...tm.htm#4159806

Cryptostorm

lol, mine pops off in my hand when im trying to turn on the lights... i WISH it wouldn't come out