looking to build a 5.0 stroker motor
#21
haha. MMR is either hit or miss it seems. Theres a couple guys running an MMR motor without a problem on these boards, but a majority of guys that went with MMR on these new mustangs are having some really bad issues. Not to mention 2 of them already had their motor blow up in less than 6 months. The other more hardcore racer forums really go into why theres so many problems with them, including boreing being way off when they took it apart to check them, and other internal issues.. like i said its either hit or miss.
#22
haha. MMR is either hit or miss it seems. Theres a couple guys running an MMR motor without a problem on these boards, but a majority of guys that went with MMR on these new mustangs are having some really bad issues. Not to mention 2 of them already had their motor blow up in less than 6 months. The other more hardcore racer forums really go into why theres so many problems with them, including boreing being way off when they took it apart to check them, and other internal issues.. like i said its either hit or miss.
#23
yeah. hit or miss. Mine has been a hit, no problems. I recommended them to about 10 people, and 4 of them had issues. Not a good hit rate. Also their customer service sucks, which i found out after i recommended them, and i will never recommend them again because they're so full of it
#24
hey i noticed the q8 ... it really depends on who installed it since ur from q8. i personally dont trust any one to do it thats why i do all the work my self on my car as all mustang owners should. any ways who did the work for you?
#25
yeah. hit or miss. Mine has been a hit, no problems. I recommended them to about 10 people, and 4 of them had issues. Not a good hit rate. Also their customer service sucks, which i found out after i recommended them, and i will never recommend them again because they're so full of it
#26
Well i'm not the grease monkey kinda guy, I don't know how to work on the internals. But I bet you the guy who worked for me used to work for Saud alzabin, ofcours you know who's Saud. He's my tuner
#27
I wonder how hard it would be to do a 3v 5.4 conversion. The forged shortblocks seem cheaper than the 5.0 shortblocks and a lot cheaper than the boss shortblocks. The added power from the extra displacement would be nice.
#28
haha. MMR is either hit or miss it seems. Theres a couple guys running an MMR motor without a problem on these boards, but a majority of guys that went with MMR on these new mustangs are having some really bad issues. Not to mention 2 of them already had their motor blow up in less than 6 months. The other more hardcore racer forums really go into why theres so many problems with them, including boreing being way off when they took it apart to check them, and other internal issues.. like i said its either hit or miss.
There are those who have wonderful experiences with MMR and a few with problems. I have heard of more bad things from them then any other manufacture. Take what I said above and confirm the info for yourself or find your own builder.
I had ST Motorsports build my motor because of his reputation of building awesome motors that last and make awesome power. My power numbers would have 100 hp more if I had a different spring for my boost controler. Adam's products are rock solid and his craftmanship and tuning is second to none. That being said, his customer service is horrible. It's damn near impossible to get him on the phone and at times he works at his own pace to do it at his leisure it seems. I would go back to him again if I had to do it all over again.
Best of luck . . .
Thread
Thread Starter
Forum
Replies
Last Post
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM