5.8 swap with t-56
10-08-2012, 03:14 PM
#1
Thread Starter
Join Date: Oct 2012
Location: Texas
Posts: 1
5.8 swap with t-56
I got two questions and bear with me I'm pretty new at this. My question is would I have to change my PCM when putting the 5.8? Second is will the 5.8 bolt on to the t-56? All this is going on an 04 gt.
10-08-2012, 07:41 PM
#2
What kind of 5.8 are you talking about, if your talking about a 351 pushrod motor then all of your wiring and your ecu will need to be changing, you will also need an adapter housing for the t56 to work.
10-30-2012, 02:15 PM
#3
Join Date: Oct 2011
Location: n.j.
Posts: 23
I like to jump in on this. I have a 99 3.8
And I do want to put it 351 or or 5.8. I want to 94 motor or 95 roller motor. What all will i need to change for this swap
Can someone please give me a full list. I started building the 302 but I don't want that no more. I want to go all the way to the 351. I mean do a real Good job. If anyone can give me any help it it will be really deeply appreciated
And I do want to put it 351 or or 5.8. I want to 94 motor or 95 roller motor. What all will i need to change for this swap
Can someone please give me a full list. I started building the 302 but I don't want that no more. I want to go all the way to the 351. I mean do a real Good job. If anyone can give me any help it it will be really deeply appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM