2013Mazdaspeed3 13.204@105.47 stock intake/exhaust
#1
2013Mazdaspeed3 13.204@105.47 stock intake/exhaust
Went to Gainesville dragstrip lastnight, was extremely happy with the times I got, with such minimal mods.
Details on the car, it's a 2013 Mazdaspeed3 with 2800 miles on the odo. Stock intake, stock exhaust. Mods are, upgraded fuel pump internals, weight reduction(rear seat, spare tire and jack) upgraded rmm, rx7 fd wheels, 225/50r-16 rear, 245/50-16 nitto 555r drag radials front, and tuned on 1 gallon meth intank with 93oct.
First pass was a 13.431@105.09, three passes total, best being the 13.204@105.47
Details on the car, it's a 2013 Mazdaspeed3 with 2800 miles on the odo. Stock intake, stock exhaust. Mods are, upgraded fuel pump internals, weight reduction(rear seat, spare tire and jack) upgraded rmm, rx7 fd wheels, 225/50r-16 rear, 245/50-16 nitto 555r drag radials front, and tuned on 1 gallon meth intank with 93oct.
First pass was a 13.431@105.09, three passes total, best being the 13.204@105.47
#4
I was only able to get 3 passes, if I could have got 5-6 I feel I could have figured the launch out, definitely had room for improvement with a 2.0sec 60ft.
#7
I am keeping the current setup for a few more months, i'm going back late November with a more aggressive tune and hopefully slicks, I want a 12.9et.
Last edited by MZRSPEED3; 10-19-2013 at 01:16 PM.
#9
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
7
09-29-2015 09:18 PM
mungodrums
Suspension
0
09-24-2015 10:12 PM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM