95 3.8 won't start after engine swap
#1
95 3.8 won't start after engine swap
Hey, folks. This problem may have been addressed in another thread, so I apologize in advance it that is the case.
Here's the issue: I recently bought and installed a used 3.8 (95,000 miles on the engine when I bought it). To keep the post short, when I got everything put back together, the car wouldn't start. All I get when I turn the key is a "click" from the starter. Had the starter "checked" at AutoZone and it tested "good".
Any thoughts on this would be helpful.
Thanks.
Here's the issue: I recently bought and installed a used 3.8 (95,000 miles on the engine when I bought it). To keep the post short, when I got everything put back together, the car wouldn't start. All I get when I turn the key is a "click" from the starter. Had the starter "checked" at AutoZone and it tested "good".
Any thoughts on this would be helpful.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Design1795
New Member Area
6
08-24-2015 04:41 PM
KEM Motorworks
5.0L (1979-1995) Mustang
20
08-14-2015 10:13 PM