Wheel alignment with fender question...
#1
Wheel alignment with fender question...
Anyone out there running wheels/tires that extend BEYOND the fender/wheel well?
Or are all wheels typically in-line or inside the fender?
Looking at some wheel options and the backspacing is a little tight - wondering if a half inch to an inch outside the fender will still look ok.
Anyone with pics - would greatly help, thanks!
Or are all wheels typically in-line or inside the fender?
Looking at some wheel options and the backspacing is a little tight - wondering if a half inch to an inch outside the fender will still look ok.
Anyone with pics - would greatly help, thanks!
#6
Mine are the 99-04 offset, they stick out a little, not sure how much.
Heres a few pics, not the best but all I have right now.
The front are pretty much flush, the rear do stick out a bit. It makes it look kind of mean, which is what I was going for.
Do I regret getting this offset?
Not really.
Would I do it again if I got another set of rims?
Probably not. I would get the s197 offset if I ever replace these.
Heres a few pics, not the best but all I have right now.
The front are pretty much flush, the rear do stick out a bit. It makes it look kind of mean, which is what I was going for.
Do I regret getting this offset?
Not really.
Would I do it again if I got another set of rims?
Probably not. I would get the s197 offset if I ever replace these.
#7
My fronts are within the fender, but the sidewall bulge of the 285/40/18 rear tires protrude out from the fender just barely at the center of the bulge. The wheel is inside the fender, it's just the "rounded" part of the sidewall that barely sticks out.
#8
That's the price of going really wide in the back.
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM