Fifthwind

Yeah, they just pop off real easy. Get like a small flat-head screwdriver and get it up underneath on the outside (the part that wraps over the leather wheel) and just push it up (toward you) and it will come off. You will see that there are about 4 studs on the back that just wedge into holes on the rubber faceplate beneath.

It is important to note, that when putting them back on, wedge the inside (toward the airbag) first because the inserts go a little under the inside edge of the airbag. After that, just push them down the rest of the way.

You can't really screw it up. They come off and go on really easy. You'll figure it out.

deekum1627

looks good i like it. i was thinking about having mine coated in a red carbon fiber look

Fifthwind

So, is anyone still considering doing this? I'd love to see how it turns out for others besides me. Maybe we can eventually see a few pics in different colors too.

@Deekum1627: That would probably look nice methinks. Rvinyl has some easy to use carbon-fibre laminate in a lot of different colors. You could get a 24"x24" sheet for only $25 http://www.rvinyl.com/carbonfiberlaminate.htm