I saw a post awhile back asking for a pic of the Roush louver from the inside of the car (to get an idea of visibility).

I found an ebay listing with a pic here:
http://www.ebuyli.com (this is an ebay site for the Long Islands region)

Search for Roush quarter window louver - seller is NewinsAccessoriesDept.

 

Thanks, now if only I could get a pic from the inside of a CDC one [8D]

 

That doesn't look right to me, the outside pics show 3 slots on the louvre, and yet the inside pic shows 5 slots

 

The CDC window louver is solid. They provide a black film to put on the window before attaching the louver and the 3M Tape. It looks like a black film window from the inside. I usually don't use the back qtr windows, I rely quite heavily on my three mirros; however, the only real problem I have encountered is when you are diagonally parked and need to look out the back passenger qtr to see if any cars are coming in your aisle/lane - you can't see anything. I don't know how much visibility the Rousch would provide. I will try to take a picture this upcoming weekend of the CDC inside look, no promises.

cheers,
dk

 

That's weird - didn't even notice that. It did seem to have more visibility than I expected, even with the open vents.

Oh well, I'm definitely going with the Roush louvers myself.

 

IMO all 1/4 window louvers/vents/scoops/covers look like sheet from the inside of the car. None of them are finished enough to have a solid look like the outside. Many (cervini for example) don't even prep the inside at all. What I did was put down 3 layers of limo tint on the window and it blacked it out completely. Looked much better IMO.

Mark