3.55 gears
#21
RE: 3.55 gears
If you want to be sure then do what I said. If you don't have a $100 option for 3.55's on your window sticker, then you have 3.31's. In 2007 the 3.55's became an option, 3.31's are standard on all 2007's be they manual or auto.
ORIGINAL: mattstang2007
sorry for beating this thread to death.
But with the link mlcrycc sent the codeforaxle says 3.31 gear with a automatic, But i have a manual.
The code on my door sticker is CG, i should have CD
here are the three codes:[align=left]BG — 3.31 — non-limited slip, base vehicle with[/align][align=left]manual or automatic transmission[/align][align=left]CD — 3.55 — limited slip, GT with manual[/align][align=left]transmission[/align][align=left]CG — 3.31 — limited slip, GT with automatic[/align][align=left]transmission[/align][align=left][/align][align=left]does any one know if they changed the codes for 2007 just a little bit, maybe added manual under CG, i am sure then that CG means i have 3.31 but i wanna make sure.[/align]
sorry for beating this thread to death.
But with the link mlcrycc sent the codeforaxle says 3.31 gear with a automatic, But i have a manual.
The code on my door sticker is CG, i should have CD
here are the three codes:[align=left]BG — 3.31 — non-limited slip, base vehicle with[/align][align=left]manual or automatic transmission[/align][align=left]CD — 3.55 — limited slip, GT with manual[/align][align=left]transmission[/align][align=left]CG — 3.31 — limited slip, GT with automatic[/align][align=left]transmission[/align][align=left][/align][align=left]does any one know if they changed the codes for 2007 just a little bit, maybe added manual under CG, i am sure then that CG means i have 3.31 but i wanna make sure.[/align]
#24
RE: 3.55 gears
BG = 3.31 7.5" Conventional available in V-6 Only.
CD = 3.55 8.8" Limited Slip (Traction Loc) available in GT with M5 Trans only.
CG = 3.31 8.8" Limited Slip (Traction Loc) available in GT with A5 Trans and 2007 M5 Only.
PS My 2007 GT (Build date 4-10-07) has 3.55 Axle Ratio. Door Code is CD.
CD = 3.55 8.8" Limited Slip (Traction Loc) available in GT with M5 Trans only.
CG = 3.31 8.8" Limited Slip (Traction Loc) available in GT with A5 Trans and 2007 M5 Only.
PS My 2007 GT (Build date 4-10-07) has 3.55 Axle Ratio. Door Code is CD.
#28
RE: 3.55 gears
*****.
~Fletch~
I agree.
Some of you are so full of it and gullible. I told this guy where to look (tag on rear end) and do a little burn out to see if it left two lines. He didn't want to crawl under and look, so I told him don't scrap it. All he has to do is scrap the stupid tag off, But he wants someone else to do it for him and even after you people did his leg work he still don't have his answer?
You all can think whatever you wish, But when you start calling name then You can just Get F--ked bud.
ZZ-whatever, please change your name. I wouldn't want to mistook for a woooooooose.
~Fletch~
I agree.
Some of you are so full of it and gullible. I told this guy where to look (tag on rear end) and do a little burn out to see if it left two lines. He didn't want to crawl under and look, so I told him don't scrap it. All he has to do is scrap the stupid tag off, But he wants someone else to do it for him and even after you people did his leg work he still don't have his answer?
You all can think whatever you wish, But when you start calling name then You can just Get F--ked bud.
ZZ-whatever, please change your name. I wouldn't want to mistook for a woooooooose.
#29
RE: 3.55 gears
hey ZZ actually i did crawl under there, and i told you it was cover by the protective layer the dealer put on so it wont rust under there, i also said knowing my luck i would scrap to hard and scrapthe tagoff just tryin to be funny, i dont know who pissed in your cheerios but it wasnet me.
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM