XCAL 2 doesn't work!!
Thread Starter
1st Gear Member
Joined: May 2007
Posts: 103
From:
RE: XCAL 2 doesn't work!!
O.K> I checked all the connections and the 1 on the intake tube wasn't locked in and I also need to put 93 octane for it to clear up. I drove it and the only problem I see is that the speedo is off. Other than that I'll give you an update when the gas is in!!!!
s197 Junkie
Joined: Sep 2006
Posts: 16,088
From: IN
RE: XCAL 2 doesn't work!!
ORIGINAL: markiemark
I'm running like 89 octane right now. Maybe it's just that. I'm gonna give it a shot and return to stock and replace with stock intake. Then run that crap gas out and fill with 93. Hopefully that does it. Thanks.
ORIGINAL: PLstang
I'm gonna go with the gas agian. Sounds like the tune is installed. It appears you have everything hooked up. It sounds like it takes a few minutes before the light comes on. That or when you start to excelerate. It may be the gas and the only way to know is well go back to stock and run out the old gas. Then you can fill her up with 93. You only have half a tank of 93 at the moment (I think thats what i read). What did you have in it before then and are you sure it was only half a tank before you refilled to 93?
I'm gonna go with the gas agian. Sounds like the tune is installed. It appears you have everything hooked up. It sounds like it takes a few minutes before the light comes on. That or when you start to excelerate. It may be the gas and the only way to know is well go back to stock and run out the old gas. Then you can fill her up with 93. You only have half a tank of 93 at the moment (I think thats what i read). What did you have in it before then and are you sure it was only half a tank before you refilled to 93?
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
Sep 1, 2015 08:16 PM
2011, break, downloading, ecm, initialize, mustang, pats, spokes, times, universal, work, xcal, xcal2, xcalibrator
