Advice on cleaning oil out of trunk?
#1
Advice on cleaning oil out of trunk?
Argh! Had to recycle some oil, but also had to go to work first... Somewhere along the way a bunch leaked out because the sprout doesn't fully tighten, I mean a lot! Its quite sad actually.
Any advice on getting it out of the grey carpet stuff?
Any advice on getting it out of the grey carpet stuff?
#4
RE: Advice on cleaning oil out of trunk?
ORIGINAL: bl1nk
Er... Im assuming you at least put it in the trunk right?
Er... Im assuming you at least put it in the trunk right?
I would sy start with a shop vac but an electric vac might heat the oil and well you know
if you've already gotten the most out then find a good cleaner
#5
RE: Advice on cleaning oil out of trunk?
ORIGINAL: Ford_Dude
well the subject is "cleaning oil out of trunk"
I would sy start with a shop vac but an electric vac might heat the oil and well you know
if you've already gotten the most out then find a good cleaner
ORIGINAL: bl1nk
Er... Im assuming you at least put it in the trunk right?
Er... Im assuming you at least put it in the trunk right?
I would sy start with a shop vac but an electric vac might heat the oil and well you know
if you've already gotten the most out then find a good cleaner
#8
RE: Advice on cleaning oil out of trunk?
#1 reason I don't do my oil changes
#1 Having to dispose of the oil myself
Sorry to hear about the problem. Be easier and cheaper (time is money) to just replace the carpet.
#9
RE: Advice on cleaning oil out of trunk?
Yup thanks guys. I'm going to remove the carpet and just dump cleaners off it out of curiousity, who knows it might work. But yes, I'll definately just buy a new carpet.
On that note... I looked through the Ford parts list and can't find anything referencing trunk carpet.... And the trunk floor pan is the metal thing underneath. Anyone have experience with this part?
On that note... I looked through the Ford parts list and can't find anything referencing trunk carpet.... And the trunk floor pan is the metal thing underneath. Anyone have experience with this part?