son of a b!tch!!!!
10-18-2007, 06:27 PM
#13
5th Gear Member
Join Date: May 2006
Location: Tennessee
Posts: 4,182
RE: son of a b!tch!!!!
ORIGINAL: thewarmachine
Just get some Ronco GLH (black, of course)
http://www.asseenontv.com/prod-pages/glhbk.htm
Just get some Ronco GLH (black, of course)
http://www.asseenontv.com/prod-pages/glhbk.htm
10-18-2007, 08:11 PM
#15
S197 Section Modder-ator
Join Date: Sep 2007
Location: Orlando FL
Posts: 13,373
RE: son of a b!tch!!!!
The brown showing is the Factory etch primer but it doesn't matter now.
Once you have a scratch that you can feel with your nail, buffing is, let's say,p#ssing in the wind?
You can attenuate a little by filling with the base color until it's almost flush. Then dab some clear until it's flush.
Wet sand and buff a bit and it will look much better. If you (or a shop) do this right with patience, it will be hard to notice it, although it's still be there.
Good luck with this.
Once you have a scratch that you can feel with your nail, buffing is, let's say,p#ssing in the wind?
You can attenuate a little by filling with the base color until it's almost flush. Then dab some clear until it's flush.
Wet sand and buff a bit and it will look much better. If you (or a shop) do this right with patience, it will be hard to notice it, although it's still be there.
Good luck with this.
Thread
Thread Starter
Forum
Replies
Last Post