Questions regarding LCA and P/H Bar install

Reply Subscribe

Thread Tools

Search this Thread

10-31-2007, 08:29 PM

MUS7ANG

1st Gear Member

Thread Starter

Join Date: Aug 2007

Location:

Posts: 76

Questions regarding LCA and P/H Bar install

Ok my search function doesn't work and not much luck using google...

I plan on installing my LCA and P/H bar tomorrow. I just ordered my LCA bolts/nuts from a local dealer and they said they will have it by tomorrow.

Does anyone know where I can find the Torque Spec doc for 05-07 Mustangs? I saw someone post it before but I can't find it.
I need to the torque specs for LCA and P/H bar bolts.

ALSO, are the bolts for the P/H bar one-time use only?? Or is it only the LCA and UCA bolts that are one time use?

Thanks in advance!

10-31-2007, 09:04 PM

jmk3

3rd Gear Member

Join Date: Sep 2006

Location: South Jersey

Posts: 628

RE: Questions regarding LCA and P/H Bar install

129 Ft.Lbs is what the book says. Keep a ratchet strap handy to help line up the bolts with the holes, don't do the final torque on any bolts until the axle is loaded with the cars weight. Just move your jackstands under rear axle or put it on ramps for final torque. Not hard, especially with air tools.