Gears
#1
Gears
I am looking for somewhere near 8 or 900 HP at the end of my cars upgrades what gears would you all recommend? I have heard that 3.55 keeps it streetable so I should just keep my stocks but that 3.73 can be useable too. What do you guys recommend? Never heard of 4.10 being praised with that much power but if you got something to back it up lemme know that too.
Oh and are the stock gears good enough... cant image that with a part that basic that upgrading to a aftermarket wiht the same ratio would be cost effective unless its made of a better matterial.
Oh and are the stock gears good enough... cant image that with a part that basic that upgrading to a aftermarket wiht the same ratio would be cost effective unless its made of a better matterial.
#2
RE: Gears
ORIGINAL: Ortoch
I am looking for somewhere near 8 or 900 HP at the end of my cars upgrades what gears would you all recommend?
I am looking for somewhere near 8 or 900 HP at the end of my cars upgrades what gears would you all recommend?
#5
RE: Gears
with that much power... ur gonna need IMO a new clutch, tranny, rear end and really fat grippy tires!
As far as gearing I'd keep the 3.55 as the power will make up for gearing and certainly not more than a 3.73....
however... if you go to a 6sp tranny...then the 3.73 or 4.10s are doable...IMO yet the 4.10s are awful steep with 800+ hp
As far as gearing I'd keep the 3.55 as the power will make up for gearing and certainly not more than a 3.73....
however... if you go to a 6sp tranny...then the 3.73 or 4.10s are doable...IMO yet the 4.10s are awful steep with 800+ hp
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM