Shift Light Question
01-26-2008, 08:47 PM
#1
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Dfw/Austin, TX
Posts: 3,465
Shift Light Question
Those of you with the shifter lights, are they easy to set-up? Do you have to have a predator tune to set it up? Where did you order it? I want one asap. Thanks.
01-26-2008, 08:56 PM
#2
2nd Gear Member
Join Date: Jan 2008
Location: Ontario, Canada
Posts: 195
RE: Shift Light Question
I personally like the Raptor shift light. I've been using it for a while and am happy with it. You don't need a tuner, just install and you can use dials on the side to adjust at what rpm you want it to light up. really easy to use.
You can check them out here.
http://www.raptorperformance.com/
You can check them out here.
http://www.raptorperformance.com/
01-26-2008, 09:04 PM
#4
5th Gear Member
Join Date: May 2005
Location: New Jersey
Posts: 4,536
RE: Shift Light Question
raptor is a self contained unit, you dont need a monster tach, or external unit. very easy to install, its only a few wire connections. i think with the S197 you have to run a wire through the firewall. thats the hardest part.
black raptor with yellow LEDs in the air vent is the ONLY way to do it.
black raptor with yellow LEDs in the air vent is the ONLY way to do it.
01-26-2008, 09:13 PM
#6
RE: Shift Light Question
https://mustangforums.com/m_3545524/...tm.htm#3545524
This is the best ive seen yet....i have had mine installed for about 6 months maybe with no problems
This is the best ive seen yet....i have had mine installed for about 6 months maybe with no problems
01-26-2008, 10:10 PM
#9
5th Gear Member
Join Date: Mar 2006
Location: Longwood, FL
Posts: 2,899
RE: Shift Light Question
Raptor in the A/C vent for me.
Very easy install as follows:
-Set your RPM's on the Raptor
-Find where you want to place it
-Tap into fuse on passenger side kick panel with one wire
-Tap into coil with another wire (don't use the red one)
-Ground the final wire!
Very easy install as follows:
-Set your RPM's on the Raptor
-Find where you want to place it
-Tap into fuse on passenger side kick panel with one wire
-Tap into coil with another wire (don't use the red one)
-Ground the final wire!
