harraid5711

*FOR MUSTANGS BUILT BEFORE 10/05 ONLY*


http://www.gtconcepts.net/mustang/0506.htm


Well i know that the "gold standards" for sequential tail lights seem to be CDC, meter4it, and webelectric, but i went another direction. I foundthis set for almost half the price of the others, $79 shipped,and it was plug-and-play (except forONE wire), soI decided to give it a shot. Now keep in mind that he has a complete plug-and-play setup much like the CDC, at around the same price. But the plug-and-play conversion that i got was only for stangs built before 10/2005, so make sure you check your build date in the driver's side door sill.

Well i ordered this setup on thursday afternoon and I recieved it today (Saturday morning), and it was sent from Alabama to Texas. The quality appeared OEM quality. Well, so far the price is right, the shipping was great, and now for the install.......it was a breeze, THERE IS NO SPLICING. I'm not all that great at this but I had them completely installed in 25 minutes......(and that included a band-aid break from my cheap pocket-knife closing on my finger [:@]). The online instructions are more than sufficient. Don't let the "one red wire" scare you off, it's a snap. After trying all the possible blinker, hazard, brake, lights on/off combinations, this thing is working flawlessly. So as long as this thing holds up, i think it's quite a steal!!!! let me know if you need any advice, install help.....

deekum1627

sounds good you have pics