AUDIO CONTROL MODULE PROGRAMMING
#12
Has anyone come up with a solution how to upgrade the ACM shaker 500 to the Navigation radio. I installed the Nav radio on my 2009 Mustang,all appears to be working except the the B2477 configuration failure.
I used the ford ids vcm and did what they advised. Still get the B2477 error.
If you go to the as-built it will only scan for my as-built information with the shaker 500. How do I get Navigation configuration.
I used the ford ids vcm and did what they advised. Still get the B2477 error.
If you go to the as-built it will only scan for my as-built information with the shaker 500. How do I get Navigation configuration.
#13
Just an update on the ACM configuration on the Navigation unit installed. The ACM must be programmed with as-built data from a navigation radio installed at the factory. This will remove the B2477 configuration failure DTC.
The update worked, no more B2477 configuration failure DTC.
The update worked, no more B2477 configuration failure DTC.
Last edited by data174; 02-02-2009 at 09:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post