HELP WITH TINTS!!! PLEASE!!
#1
HELP WITH TINTS!!! PLEASE!!
I recently got tints, and now i am noticing that the driver and passenger side windows have some sort of lines on it as if it was rubbing agains the door... I was told that this happens because u need to wipe the rubber of after getting a car wash???!!?!?!?! Can someone confirm this or tell me why this is happening. THANKS
#2
What you need is called Moleskin. It's a felt like lining that you install on the inside of the rubber insulation on the inside of the window that contacts the glass. It's softer then the rubber and will not scratch the tint like the rubber does. Hope this helps!
#4
if you had a shop install the tint, you should take it back and ask if they were aware of this problem that has been around for several years... IMO, you should only have to pay for the moleskin, while the tint shop takes care of tinting the windows again.
#6
I'm late but +1 on the moleskin as suggested by others. If your tint is scratched then yes it needs to be replaced. You might want to check and see if the lines are actual scratches or just smears.
#7
Theres definitely a few lines that are scratches so there going to have to replace it. BTW this is the moleskin that i ordered.... http://www.tintprotector.com/ford/index.htm
I hope this will be good.
I hope this will be good.
#8
Theres definitely a few lines that are scratches so there going to have to replace it. BTW this is the moleskin that i ordered.... http://www.tintprotector.com/ford/index.htm
I hope this will be good.
I hope this will be good.