Carbon Fiber coating
Thread Starter
3rd Gear Member
Joined: Jan 2008
Posts: 519
From: Northern Indiana
Toy4Bob, thanks for the pix I am very interested in getting those same two peices you got. I was concerned that the process would distort the design when changing direction so much like in the cup holders but it looks like they are black inside and not C/F... is that correct? I thought it might look strange.
If you want real C/F the place in the link below has actual C/F but its expensive and they only have the console top as I understand it. See the link below.
http://www.carbigncraft.com/catalog/...5e370fbe3dcaeb
If you want real C/F the place in the link below has actual C/F but its expensive and they only have the console top as I understand it. See the link below.
http://www.carbigncraft.com/catalog/...5e370fbe3dcaeb
Thanks for all the compliments everyone.
2nd Gear Member
Joined: Jun 2007
Posts: 453
From: LaSalle, Ontario
What was the turn around time getting this done? I purchased a spare radio bezel and I either want to paint the bezel a gloss black or do this to it.
Do you know if they can adjust the direction of the weave? On yours the the weave on the bezel is going in a different direction then the center console. It would look better if the direction matched on the two.
Do you know if they can adjust the direction of the weave? On yours the the weave on the bezel is going in a different direction then the center console. It would look better if the direction matched on the two.
Thread Starter
3rd Gear Member
Joined: Jan 2008
Posts: 519
From: Northern Indiana