Carbon Fiber coating
Thread Starter
3rd Gear Member
Joined: Jan 2008
Posts: 519
From: Northern Indiana
What was the turn around time getting this done? I purchased a spare radio bezel and I either want to paint the bezel a gloss black or do this to it.
Do you know if they can adjust the direction of the weave? On yours the the weave on the bezel is going in a different direction then the center console. It would look better if the direction matched on the two.
Do you know if they can adjust the direction of the weave? On yours the the weave on the bezel is going in a different direction then the center console. It would look better if the direction matched on the two.
As far as the weave direction, thanks for pointing that out, I hadn't notice, and luckily it doesn't bother me.
I would think the could, just hadn't thought of it that way when they did it. If it was a concern for you I would definitely express your wishes when you ordered.
Former Sponsor - Cancelled
Joined: Dec 2008
Posts: 59
From: Florida
What was the turn around time getting this done? I purchased a spare radio bezel and I either want to paint the bezel a gloss black or do this to it.
Do you know if they can adjust the direction of the weave? On yours the the weave on the bezel is going in a different direction then the center console. It would look better if the direction matched on the two.
Do you know if they can adjust the direction of the weave? On yours the the weave on the bezel is going in a different direction then the center console. It would look better if the direction matched on the two.
Former Sponsor - Cancelled
Joined: Dec 2008
Posts: 59
From: Florida
http://www.carbigncraft.com/catalog/...5f83d3b5372c4c
Full blown replacement, I can't stand the stick ons but what the OP did is much more economical and I'd say it looks just as good. The guy has a ton of different weaves you can choose from.
Full blown replacement, I can't stand the stick ons but what the OP did is much more economical and I'd say it looks just as good. The guy has a ton of different weaves you can choose from.
Former Sponsor - Cancelled
Joined: Dec 2008
Posts: 59
From: Florida
The Carbign Craft stuff is pretty nice!
Just added some of their line to our store!
The console replacement is Nice!
The Fuel Rail Covers are also sharp under the hood!
Check out all our carbon Fiber products for the interior and under the hood
http://www.southernmustangparts.com/...ance-m-41.html
Ken
Just added some of their line to our store!
The console replacement is Nice!
The Fuel Rail Covers are also sharp under the hood!
Check out all our carbon Fiber products for the interior and under the hood
http://www.southernmustangparts.com/...ance-m-41.html
Ken
I don't appreciate you hijacking a thread about my products!
Pat
2nd Gear Member
Joined: Apr 2008
Posts: 231
From: MI
blue2k, very cool. I've seen the hydrographics process in my work, and it is really sweet.
Do you have other patterns/ colors that you do? For example, engine turned aluminum, or other stuff?
Can you do metal as well (so I can make my dash look like Bullitt but not have to pay for all the bits)?
Do you have a website I can go see?
Do you have other patterns/ colors that you do? For example, engine turned aluminum, or other stuff?
Can you do metal as well (so I can make my dash look like Bullitt but not have to pay for all the bits)?
Do you have a website I can go see?
2nd Gear Member
Joined: Apr 2008
Posts: 231
From: MI
blue2k, very cool. I've seen the hydrographics process in my work, and it is really sweet.
Do you have other patterns/ colors that you do? For example, engine turned aluminum, or other stuff?
Can you do metal as well (so I can make my dash look like Bullitt but not have to pay for all the bits)?
Can you do exterior (see question above)? How durable is it, could I do wheels for example?
What happens when you do something with a very deep draw like a side mirror, will the pattern stretch too much and look funky?
Do you have a website I can go see?
Do you have other patterns/ colors that you do? For example, engine turned aluminum, or other stuff?
Can you do metal as well (so I can make my dash look like Bullitt but not have to pay for all the bits)?
Can you do exterior (see question above)? How durable is it, could I do wheels for example?
What happens when you do something with a very deep draw like a side mirror, will the pattern stretch too much and look funky?
Do you have a website I can go see?
Last edited by pnut; Feb 6, 2009 at 03:50 PM.
1st Gear Member
Joined: May 2008
Posts: 114
Do you have these pieces in stock to paint, or do we need to take them out of our car and ship them to you for paint? As this is my only car at the moment I may be interested if you could paint the consoles to me at a inflated rate and get a refund once you receive my unpainted parts.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
MustangForums Editor
S550 2015-2023 Mustang
1
Oct 1, 2015 09:29 AM
