If you were gonna buy a new mod this week...
#41
I've been searching for a wheel/tires set-up(again) and decided on these wheels for a summer set and maybe some 555 Nittos. The wheels(338-Gray) come in at $150.00 each and are 20x8.5's(all fours).
http://www.bossmotorsports.com/custo...els.cfm?id=408
http://www.bossmotorsports.com/custo...els.cfm?id=408
#43
I think what im gonna do is order a CHE K member and torque limiters. I know soon i should be lowering the car and im gonna grab springs, camber adjusters, control arm relocation kit and a panhard bar. I might get the panhard bar before i get everything else just to spread out the expense.
Also, if i get a panhard bar do i need the brace too?
Also, if i get a panhard bar do i need the brace too?
#44
i think my next investment, since i just ordered the LCA's and relo brackets, will be an adjustable panhard bar and maybe a brace. after that maybe i will give the k-member brace and TQ limiters a shot. i am curious to feel the difference so many people say it makes.
#45
I think what im gonna do is order a CHE K member and torque limiters. I know soon i should be lowering the car and im gonna grab springs, camber adjusters, control arm relocation kit and a panhard bar. I might get the panhard bar before i get everything else just to spread out the expense.
Also, if i get a panhard bar do i need the brace too?
Also, if i get a panhard bar do i need the brace too?
Last edited by BigDreams05; 03-17-2009 at 07:57 PM. Reason: please erase my double posting
#46
no, you dont need a brace, but it does help to hold things together tightly. or tighter than stock anyway.
and if your going to do the panhard bar, think about getting the BMR bar with the relocation bracket for the differential rear cover girdle/brace. it needs the relocation bracket to clear the differential cover if you get the aftermarket cover.
and if your going to do the panhard bar, think about getting the BMR bar with the relocation bracket for the differential rear cover girdle/brace. it needs the relocation bracket to clear the differential cover if you get the aftermarket cover.