Dead Peddle
#1
Dead Peddle
Bought a Shelby dead peddle.... Problem is that it's way too close.... Hurts to put foot on it...
Pic...
So I extended it 3"... Here's the 1/4" stock that I used...
Here it is welded up....
Much.... Much.. happier as dead peddle now that it's 3" farther back... No need to remove kick pannel to install either!!
Pic...
So I extended it 3"... Here's the 1/4" stock that I used...
Here it is welded up....
Much.... Much.. happier as dead peddle now that it's 3" farther back... No need to remove kick pannel to install either!!
#2
Three inches ain't enough... Did another 1-1/2"...
Had to clearance it for the peddle... It's perferctly in line with the clutch now... Feels GREAT... Folks that market these, take note!!! Needs to be another 4-1/2" past the mounting bolt!!!
Had to clearance it for the peddle... It's perferctly in line with the clutch now... Feels GREAT... Folks that market these, take note!!! Needs to be another 4-1/2" past the mounting bolt!!!
Thread
Thread Starter
Forum
Replies
Last Post
jessicarabbit
GT S197 General Discussion
12
09-25-2015 12:41 PM