VanWilder

well I went out to look for any leaks and could not see or hear any but while the car was idling it pulled a P0171 CEL...did a little researching and it is a LEAN code for cylinder bank 1. Caused by a dirty MAF, vacuum leak, egr not closing properly, etc...has anybody experienced this after a cam install and what do I need to do

eddypython

sounds AWSOME but I want to hear it rev up..

Cal26Stang

thats pretty legit

VanWilder

I'll see if I can get a clip of it tonight man

candymanjl

ha ha, that sounds cool. if I get cams down the road I'll definitely go for something with a lumpy idle

VanWilder

well I got the idle fixed...turned out all it was was needing to clean the throttle body and MAF sensor...definately makes me feel better thats all it was

hammeron

good to hear it, now for new vids, please

VanWilder

will try to get one tonight...the camera battery is dead and we dont have a charger...had a friend of ours take the camera to charge it hopefully will have it tonight

hammeron

great....looking forward to hearing them
between 750-850 rpms

deekum1627

sounds nice cant wait to hear your new clips now that u fixed the idle