logging analog with xcal3?
#2
Got it. Its a firewire cable
Pin1 white = 5V
Pin2 black = gnd
Pin3 orange = analog 1
Pin4 blue = analog 1 gnd
Pin 5 red = analog 2
Pin 6 green = analog 2 gnd
All I need to connect is analog 1 + analog 1 gnd.
And if you're looking into the end of the firewire connector with the long end down and the skinny end up, Pin 1 is on the lower left and pin 2 is across from pin1. They are numbered like this:
5 6
3 4
1 2
Pin1 white = 5V
Pin2 black = gnd
Pin3 orange = analog 1
Pin4 blue = analog 1 gnd
Pin 5 red = analog 2
Pin 6 green = analog 2 gnd
All I need to connect is analog 1 + analog 1 gnd.
And if you're looking into the end of the firewire connector with the long end down and the skinny end up, Pin 1 is on the lower left and pin 2 is across from pin1. They are numbered like this:
5 6
3 4
1 2
Thread
Thread Starter
Forum
Replies
Last Post
nmra1965
Other Professional Racing
0
09-26-2015 10:46 AM
zanemoseley
2005-2014 Mustangs
6
09-06-2015 12:58 PM