What is the proper procedure for engine break-in
#12
Im still at under 600 miles, but I've driven fairly hard. Every time I drive it, I do a couple high RPM passes through about the middle or top of 3rd gear. Made a couple passes to about 100 or so. Also, if Im going a speed where I could be in say either 3rd and be reving a little high, or in 4th and reving a little low, I'll pick 3rd.
But I also keep from staying at one RPM for a while as per advice I've heard here.
All in all, I'm breaking it in like I'll probably drive it always.
But I also keep from staying at one RPM for a while as per advice I've heard here.
All in all, I'm breaking it in like I'll probably drive it always.
#14
"Search" is your friend.
Found this subject covered pretty well in a previouse thread..
https://mustangforums.com/forum/5-0-...procedure.html
Found this subject covered pretty well in a previouse thread..
https://mustangforums.com/forum/5-0-...procedure.html
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM