What do you think about this project?
6th Gear Member
Joined: Jun 2007
Posts: 16,182
From: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Sweet. But too bad it has that big defect in the last pic.... what looks like an ugly gomer with a cell phone camera. Must be the lighting... 
BTW, the toothpaste tube is missing the cap (3rd pic).
BTW, the toothpaste tube is missing the cap (3rd pic).
Last edited by Nuke; Jan 22, 2011 at 02:36 PM.
Thread Starter
5th Gear Member
Joined: Jul 2006
Posts: 3,063
From: TX
The clear coat, do you spray that on immediately after the base coat?
Or can you spray the clear coat on at any time after the base has fully dried?
Or do you have to spray the clear on with in a cerrtain time frame after the base has been applied but before it is fully dried?
The reason why I ask is because a body shop guy tole me that the clear has to interact with the base some to cause adhesion to prevent the clear pealing off (if not now, in a few years down the line).
Or can you spray the clear coat on at any time after the base has fully dried?
Or do you have to spray the clear on with in a cerrtain time frame after the base has been applied but before it is fully dried?
The reason why I ask is because a body shop guy tole me that the clear has to interact with the base some to cause adhesion to prevent the clear pealing off (if not now, in a few years down the line).
How you keep your wife from killing you??? Gotta be single :P :P :P
Thread Starter
5th Gear Member
Joined: Jul 2006
Posts: 3,063
From: TX
Well, it looks better this way. I am planinng to get the extentions and paint them as well. After my intake manifold and cai and a nice detailing job, engine should look pretty good. I cant wait for winter be over.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
1
Jan 21, 2016 01:30 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM