HELP! DOOR!
#2
#3
he's talking about the large body connector. I had to disconnect it about 2 years ago and do not remember how I did it. I almost want to say that you have to apply pressure to both sides at once b/c there are tabs on both sides. sorry can't help, but playing with it, you should be able to do it.
what I can share is that grommet is a huge PITA to put back in the hole. I recommend greasing the hole with silicone and wrapping a nylon string around the grommet to keep it from wobbling around while trying to install it. it took me an hour of playing with it before I figured out that trick.
what I can share is that grommet is a huge PITA to put back in the hole. I recommend greasing the hole with silicone and wrapping a nylon string around the grommet to keep it from wobbling around while trying to install it. it took me an hour of playing with it before I figured out that trick.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM