Informational Documents
5th Gear Member
Joined: Mar 2006
Posts: 2,179
From: Nor Cal
RE: Everything you ever wanted to know about OCTANE
ORIGINAL: Professor Wizard
EVERYTHING you ever wanted to know about OCTANE...
http://www.prime-mover.org/Engines/G...es/octane.html
EVERYTHING you ever wanted to know about OCTANE...
http://www.prime-mover.org/Engines/G...es/octane.html
Richard
MF Moderator
Joined: Mar 2005
Posts: 3,441
From: Missouri
MF Moderator
Joined: Mar 2005
Posts: 3,441
From: Missouri
2nd Gear Member
Joined: Jul 2006
Posts: 372
From: 661 California
RE: Informational Documents
would there happen to be an easier diagram for installing new springs, the only diagram I saw showed the struts and I am sure there has to be an easier way then removing the entire front esembly. Thanks
By the way awesome information! thanks!
By the way awesome information! thanks!
5th Gear Member
Joined: Mar 2006
Posts: 2,179
From: Nor Cal
RE: Informational Documents
The front struts are very easy to remove. Simply unbolt the lower two mounting bolts the sway bar end link and then the 4 bolts up top and the strut will practically fall out. Be sure and support the brake rotor hub Assembly as it will try to fall out of place and you may damage the lower ball joint if you let it .
Richard
Richard
MF Moderator
Joined: Mar 2005
Posts: 3,441
From: Missouri
RE: Informational Documents
Please don't be offended... I am going to leave these posts here for a little longer..
then I am going to delete them - - - cleanup so that only the listings of documentation is on here without the chat.
then I am going to delete them - - - cleanup so that only the listings of documentation is on here without the chat.
3rd Gear Member
Joined: Jan 2005
Posts: 971
From: NC
