Musckletang

Does anyone know if the stock GT Hpipe will bolt to the v6 stock manifolds? I can't find the answer using the search function. I'm strongly thinking about getting a GT dual exhaust set up and wonder if it will bolt up.

So are the exhaust manifolds the same diameter and same location as the GT's?????

48prerunner

Short answer no, but you can cut both the stock v-6 y and the stock gt h and weld the two together and then any exhaust for a gt will bolt on thats what i did on my car. the v6 pipe coming off the manifolds is smaller than the gt just cut after the cats slip the gt pipe over and weld

Musckletang

Thanks. I was beginning to wonder if anyone had done this yet.

48prerunner

Yeah I bought a gt h pipe on ebay for 2.25 but shipping was 30

157dB

No they dont just bolt up.
But its been done with some success
another way.

Musckletang

Thanks for the link!! I'm going to duals due to the vortech I'm installing. Not to mention it looks cool, sounds good, and it's what I want.

PennState

no it doesn't but i learned that the hard way. But its not too bad if you just cut and weld it on