negative battery terminal corrosion -

4.0L V6 Technical Discussions Any questions about engine, transmission, exhaust, tuners/CAI, or gearing can be asked here!
Sponsored by:
Sponsored by:

Thread Tools Search this Thread
Old 08-03-2013, 07:32 AM   #1
2nd Gear Member
Thread Starter
chrisdbassplayer's Avatar
Join Date: Sep 2007
Posts: 327
Default negative battery terminal corrosion

I replaced my stock battery last year after it finally died. I was finding myself cleaning the negative terminal often due to a build up of corrosion. Now with the new battery it is still doing the same thing. Talked to a friend who also has a 4.0 and said he is having the same issue. I wondered if anyone knows why this is happening? Is there some type of disimilar metal corrosion going on? any thoughts?
chrisdbassplayer is offline   Reply With Quote
Old 08-03-2013, 10:10 AM   #2
2nd Gear Member
Join Date: Jul 2012
Location: Florida
Posts: 332

I have the stock battery terminals and never had any corrosion on either side
JJHoover is offline   Reply With Quote
Old 08-03-2013, 10:53 AM   #3
1st Gear Member
slipperman's Avatar
Join Date: Jul 2012
Location: Illinois
Posts: 107

AGM Batteries do much better with corrosion.
I needed to replace the cable harness when I first took possession of my '04.
I'm still running the liquid acid battery, but when it needs replacing, an absorbed glass mat type will go in.
slipperman is offline   Reply With Quote
Old 08-03-2013, 12:17 PM   #4
6th Gear Member
Nuke's Avatar
Join Date: Jun 2007
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,186

Usually, terminal corrosion is an indication of a crack where gassing is causing the terminal to corrode. Most case cracks will occur at the terminals as they are weak points in the overall structural shell design.

Is there any chance that you or someone has over-tightened the clamp to the point of stressing the case-to-terminal?
Nuke is offline   Reply With Quote
Old 09-05-2013, 11:16 AM   #5
DenIs2Fast4U's Avatar
Join Date: Mar 2013
Location: Ohio
Posts: 44

I agree with nuke, the first thing you need to do is check for cracks. If you don't find any though I would reccomend you purchase battery terminal washers (the $2 felt ones) and some battery terminal spray. I have had corrosion issues on a few older vehicles before so I started using these things and they help tremendously. I now put a set of the washers and spray on every vehicle I own. If that doesn't help then you definitely have a bigger issue.
DenIs2Fast4U is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Terminated Whipple GT battles '13 GT500 on E85 Bokeo Street/Strip 6 10-10-2015 08:28 PM
Rough idle and vibrating 4cylinderplus2 V6 (1994-2004) Mustangs 9 09-30-2015 05:26 PM
Clear codes on '94 sn95 BOB ROME 5.0L (1979-1995) Mustang 2 09-28-2015 11:10 AM
seems like car doesn't have enough juice to turn over logan409 4.6L (1996-2004 Modular) Mustang 10 09-26-2015 07:43 PM
87 4cyl battery drain issue wilsonro 4 Cylinder NA and Turbo 0 09-11-2015 07:13 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 05:38 AM.