4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Installing my Throttle body and plenum tommrrow!

Thread Tools
 
Search this Thread
 
Old 03-10-2006, 10:27 PM
  #1  
GrayGhost01GT
4th Gear Member
Thread Starter
 
GrayGhost01GT's Avatar
 
Join Date: Jul 2004
Location: MD
Posts: 1,589
Default Installing my Throttle body and plenum tommrrow!

Hey guys, im an amature mechanic im only 17 and im gonna try to install my 75 MM throttle body and my Plenum tommrrow. Ive heard some bad stories on how if you dont do it just right it can have a vaccum leak and whistle. How do I avoid this and does anyone have any instruction to install its a C&L plenum BBK 75MM Throttle body! Any advice and things to check? I Hope this is an easy install
GrayGhost01GT is offline  
Old 03-11-2006, 12:31 AM
  #2  
JT76
Moderator
 
JT76's Avatar
 
Join Date: Aug 2005
Location: Buffalo, NY
Posts: 4,967
Default RE: Installing my Throttle body and plenum tommrrow!

be very careful with the plastic TPS sensor , the screws are gonna be a pain in the a$$ to get off, just use the screw driver and tap (TAP NOT POUND) the end of the screwdriver with a hammer while turning and that will get them out, after u have the new plenum on make u sure u tighten the bolts down evenly, dont just tighten them down one at a time, alternate side to side, this should help aviod any leakes and make everything nice and even. Other than that it is very simple, i did mine about 2 weeks ago and i am also inexperienced (im 19) it only took me about 1 1/2 hr. Good luck man and have fun, its more satisfying when you do this stuff yourself rather than a shop isnt it?
JT76 is offline  
Old 03-11-2006, 12:47 AM
  #3  
SilverGTV8
4th Gear Member
 
SilverGTV8's Avatar
 
Join Date: Aug 2003
Location: United States
Posts: 1,974
Default RE: Installing my Throttle body and plenum tommrrow!

Try this http://www.stangpro.com/html/articles/tbinstall.htm

It's a write I did on my install.
SilverGTV8 is offline  
Old 03-11-2006, 02:45 AM
  #4  
rbstang
6th Gear Member
 
rbstang's Avatar
 
Join Date: Apr 2005
Location: Wilmington, NC
Posts: 5,608
Default RE: Installing my Throttle body and plenum tommrrow!

its supposed to whistle...
rbstang is offline  
Old 03-11-2006, 08:45 AM
  #5  
SilverGTV8
4th Gear Member
 
SilverGTV8's Avatar
 
Join Date: Aug 2003
Location: United States
Posts: 1,974
Default RE: Installing my Throttle body and plenum tommrrow!

Some combinations whistle more then others.


You should check for leaks.

Get a can of carb cleaner, start the car and let it idle, spray just a little bit at all the connections and listen for an idle speed change. If you don't have any changes you are good to go.

I would STRONGLY recommend you do this when the motor is cold. Carb cleaner is highly flammable and I wouldn't want you to get your car lit up.
SilverGTV8 is offline  
Old 03-11-2006, 09:22 AM
  #6  
1BAD3V
6th Gear Member
 
1BAD3V's Avatar
 
Join Date: Nov 2005
Location: Clarksville TN
Posts: 6,828
Default RE: Installing my Throttle body and plenum tommrrow!

I dont think you'll have much of a problem aslong as you've done other stuff like intakes, and brakes, you should be ok. I was about your age when I put on my first CAI, it was a pain, but I got it own my own, than brakes became easy and now I think I can do a t/b and plenum myself. Good luck and let us know how it goes.
1BAD3V is offline  
Old 03-11-2006, 10:35 AM
  #7  
nailman28
2nd Gear Member
 
nailman28's Avatar
 
Join Date: Jan 2005
Location:
Posts: 212
Default RE: Installing my Throttle body and plenum tommrrow!

its pretty simple i just did mine last nite it was a bbk with plenum. and it took 30 mins. just remember all the vacuum lines. yea the TPS is a bitch. but u will definatly feel power gain from 4k on and louder engine note too. i think the mod was well worth it
nailman28 is offline  
Old 03-11-2006, 10:51 AM
  #8  
GrayGhost01GT
4th Gear Member
Thread Starter
 
GrayGhost01GT's Avatar
 
Join Date: Jul 2004
Location: MD
Posts: 1,589
Default RE: Installing my Throttle body and plenum tommrrow!

Hey guys thanks whats the TPS?
GrayGhost01GT is offline  
Old 03-11-2006, 10:57 AM
  #9  
StickShifty
5th Gear Member
 
StickShifty's Avatar
 
Join Date: May 2005
Location: New Jersey
Posts: 4,536
Default RE: Installing my Throttle body and plenum tommrrow!


ORIGINAL: GrayGhost01GT

Hey guys thanks whats the TPS?
you might need some help then.

throttle position sensor.
StickShifty is offline  
Old 03-11-2006, 11:08 AM
  #10  
GrayGhost01GT
4th Gear Member
Thread Starter
 
GrayGhost01GT's Avatar
 
Join Date: Jul 2004
Location: MD
Posts: 1,589
Default RE: Installing my Throttle body and plenum tommrrow!

Does anyone have a pic? Or anything? or any helpful info imma do this. This morning
GrayGhost01GT is offline  


Quick Reply: Installing my Throttle body and plenum tommrrow!



All times are GMT -5. The time now is 10:08 PM.