NORTON98

Right now im picking out parts to get ready to do a PI swap... Would these cams work well for a PI swap?

Ebay listing:

http://cgi.ebay.com/ebaymotors/96-04...spagenameZWDVW

Comps cams website of the cam:

http://www.compperformancegroupstore...Category_Code=

2000GT4.6

I am thinking you cannot run a .550 lift cam on a PI swapped NPI block??

NORTON98

IDK

TT

96GTMustang

Those cams will work but you will need to upgrade your computer and mas air meter. If you step down to the 102500 xe262ah- you can still use your stock computer and mass air meter. The only thing you will have to do is tune it. I actually just completed the swap and are waiting for my cams to come in the mail. Oh and make sure you have at least 3:55 gears..

NORTON98

Hmmm...What do you mean by 3:55 gears? Im going to have the swap done along with a dyno tune. Why do you have to upgrade the computer and MAF? I havnt heard of having to do that b4.

Should I wait for some other cams to come up? I really want to buy cams used for a better price.

Nadelle

do some research bud. alot of stuff needs to be done when you swap in some hot cams.