4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Changing Shocks?

Thread Tools
 
Search this Thread
 
Old Aug 20, 2006 | 11:11 PM
  #1  
red99droptop's Avatar
red99droptop
Thread Starter
1st Gear Member
 
Joined: Jun 2006
Posts: 112
From: Atlanta, Ga.
Default Changing Shocks?

I was just curious about how easy it is to replace my shocks on 99 gt. I replaced them on my motorcycle and it was simple. Is there any problems I may run into.

Thanks
Old Aug 20, 2006 | 11:15 PM
  #2  
4.698GT's Avatar
4.698GT
4th Gear Member
 
Joined: Jan 2005
Posts: 1,984
From: Port Monmouth, New Jersey
Default RE: Changing Shocks?

Probably not, the front Struts are a liittle more trouble some if you dont have any air tools though
Old Aug 20, 2006 | 11:15 PM
  #3  
sitnlopro99gt's Avatar
sitnlopro99gt
4th Gear Member
 
Joined: Jan 2006
Posts: 1,823
From:
Default RE: Changing Shocks?

easy as pie, Rears are as simple as jacking up the back put the stands have the floor jack raise the rear till the pressure is released from the shocks enough to undo bolt and trying to fit in the back inside of the trunk to losin the top bolt to pull the shocks out took me about 30 mins to do both and then pull right out. Fronts are just as easy. If youve ever done springs its basically the same first 5 steps. Good luck Dan-
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2007StangV6
2005-2014 Mustangs
30
Jan 28, 2016 06:09 PM
guitarman376
Classic Mustangs (Tech)
6
Oct 11, 2015 01:47 AM
67STANGX2
V6 (1994-2004) Mustangs
6
Sep 24, 2015 12:29 PM
robjh22
Suspension
0
Sep 8, 2015 12:47 PM




All times are GMT -5. The time now is 06:37 PM.