how much rwhp???
#1
how much rwhp???
what rwhp and about what should this set up run in the 1/4???
03 Mustang GT
Steeda Cold Air Intake
75mm TB
Upper Plenum
BBk X Pipe
Borla Stinger Catback
Steeda Underdrive Pullies
4.10 gears
All tuned with the Excalibrator 2
a buddy of mine wants to know... we dont have a dyno worth 2 ****s in town and out track is closed for now.
03 Mustang GT
Steeda Cold Air Intake
75mm TB
Upper Plenum
BBk X Pipe
Borla Stinger Catback
Steeda Underdrive Pullies
4.10 gears
All tuned with the Excalibrator 2
a buddy of mine wants to know... we dont have a dyno worth 2 ****s in town and out track is closed for now.
#9
RE: how much rwhp???
Are you still on stock tires with 4.10's???? if so for sure 14's. If you have a good set of tires and practice, I wouldn't be surprised if you could pull a 13.8-13.9. This all depends on the track and where you live too.
#10
RE: how much rwhp???
It all depends on the tires, and how hard u want to beat on the car.
I ran a 13.7 with only full exhaust, a CAI, and other odd n ends, (shifter, BBK springs.. little stuff) on mastercraft 285s.
If he wants to put on a good set of slicks, leave the line at 5 grand, and never let off the gas from then on it'd go mid 13s. If your just gonna run street tires, leave the line at 2500 or so and granny shift it, then probably 14. +
I know an older guy that went a 12.74 in an 04 GT 5speed with headers, underdrives, cold air intake, sct tuner, 4.10s, Mouser axles, Spec clutch, upper and lower control arms, and on MT slicks. But thats leaving at 5 grand, hoping for the best.
I ran a 13.7 with only full exhaust, a CAI, and other odd n ends, (shifter, BBK springs.. little stuff) on mastercraft 285s.
If he wants to put on a good set of slicks, leave the line at 5 grand, and never let off the gas from then on it'd go mid 13s. If your just gonna run street tires, leave the line at 2500 or so and granny shift it, then probably 14. +
I know an older guy that went a 12.74 in an 04 GT 5speed with headers, underdrives, cold air intake, sct tuner, 4.10s, Mouser axles, Spec clutch, upper and lower control arms, and on MT slicks. But thats leaving at 5 grand, hoping for the best.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Archive - Mustangs For Sale
0
09-17-2015 07:32 PM
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM