HpOoRwSeEr

a P.I. conversion is taking parts from a 99-04 and puting them on a 95-98 correct? if so..... what parts need to be swapped to complete the P.I. swap?

Hash06

first off it is for a 96-98 and you need the 99-04 heads cams intake and gaskets. i think you need a heater hose too

HpOoRwSeEr

if i do that, what power increase am i looking at?

*Blk_96_Stang_GT*

somewhere around 40rwhp i think

red2k1gt

If your going to do a PI swap get ported heads and more agressive cams this way you can make some serious hp.

silverstang1996

don't get stock 99-04 heads either get some good perf. ones.

*Blk_96_Stang_GT*

getting stock heads is fine, if you p&p them and get some nice cams you'll make some really good HP. Im planning on doing the swap and more then likley with just stock heads since im low on cash and i need to fix my burning oil problem.

JJ03MustangGT

with the pi swap, ull be a hare faster than a stock 99-04. by the time u do that, just might as well have gotten some aftermarket heads and cams, and gotten more power out of em

Jefferson

approx. how mush extra power?

JJ03MustangGT

???????? explain