h-pipe instalation
09-19-2006, 05:21 PM
#1
2nd Gear Member
Thread Starter
Join Date: May 2006
Location:
Posts: 235
h-pipe instalation
I just got my mac o/r h pipe today. I have to go to work in an hour though so i am going to start installing it when i get home. Are they are tips or anything with installing one of these. I somewhat know what i am doing as i have installed numerous catbacks on cars. I was looking underneath my car and where the stock pipes go up toward the engine i was wondering how you disconnect that. thanks for the help
09-19-2006, 05:32 PM
#2
5th Gear Member
Join Date: May 2006
Location: south carolina
Posts: 3,534
RE: h-pipe instalation
yea there is, its easier with a lift....make sure u have sockets, extensions, and universal joints, for the odd places. and air gun helps a lot too, from there just take ur time, and go peace at a time. its pretty basic.
09-19-2006, 05:52 PM
#3
4th Gear Member
Join Date: Dec 2005
Location: Deltona, fl
Posts: 1,239
RE: h-pipe instalation
its all pretty easy except for the passenger side where whe midpipe meets the manifold. you need a rotating socket to get it also i did this on my buddies lift. it will be harder while your laying on the ground
09-19-2006, 05:59 PM
#5
4th Gear Member
Join Date: Apr 2006
Location:
Posts: 1,409
RE: h-pipe instalation
Correct. If you have a convertible like me. I could get a breaker bar and socket on it but i would try to turn the breader bar and run into sub frame connectors. I ended up taking it to a shop and having them do it. I watched what they did and what they used. Get one of the REALLY LONG extensions from Auto Zone like a 2 ft one. And a 15mm wobbly deep well or a universal joint + 15mm deep well.
09-19-2006, 08:43 PM
#10
RE: h-pipe instalation
ORIGINAL: jst854
I just got my mac o/r h pipe today. I have to go to work in an hour though so i am going to start installing it when i get home. Are they are tips or anything with installing one of these. I somewhat know what i am doing as i have installed numerous catbacks on cars. I was looking underneath my car and where the stock pipes go up toward the engine i was wondering how you disconnect that. thanks for the help
I just got my mac o/r h pipe today. I have to go to work in an hour though so i am going to start installing it when i get home. Are they are tips or anything with installing one of these. I somewhat know what i am doing as i have installed numerous catbacks on cars. I was looking underneath my car and where the stock pipes go up toward the engine i was wondering how you disconnect that. thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-10-2015 08:39 PM