motive gears
#12
RE: motive gears
It is attributed to inproper gear install. Just make sure you take it to a good mechanic that's done a lot of them before. I had 3.90 motives in my GT and loved em!
ORIGINAL: DesertMach
I have Motive 4:10's absolutely no problems with them so far (9k miles on them and a good number of track runs).
I have heard some people complain about gear whine with them, I would just atribbute that to not having them installed correctly...
I have Motive 4:10's absolutely no problems with them so far (9k miles on them and a good number of track runs).
I have heard some people complain about gear whine with them, I would just atribbute that to not having them installed correctly...
#13
RE: motive gears
go 4.10s or go home. trust me your will love 4.10s. and dont listent to people saying you will lose top end. and your car can still go fast. i had my car up to 130 the other nigth and it still pulled pretty hard. and i know it was stupid but it was late at night and ive always wanted to see if 5th gear still sucked and to tell you the truth i was pretty impressed
#15
RE: motive gears
ORIGINAL: ericdiver
how can u tell if gears whine with all the whineing comming out of the 3650.... i put some castrol or something syn atf fuild, and i think it got worse, i just order D4 redline i heard thats the best...we shall c
how can u tell if gears whine with all the whineing comming out of the 3650.... i put some castrol or something syn atf fuild, and i think it got worse, i just order D4 redline i heard thats the best...we shall c
#16
RE: motive gears
The guy who I had install my gears would only guarantee no gear whine with the FRPP's. Although a buddy of mine got some FRPP 3.73's installed by a guy who did it for 300 bucks, and he's got some bad gear whine. So I'd have to say the installer is most important. Stick with FRPP's or motive though, don't go any cheaper.
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM