2000GT4.6 - read this.
#21
5th Gear Member
Join Date: Dec 2004
Location: In between Your Mom's Titties, skeet skeet..
Posts: 2,045
RE: 2000GT4.6 - read this.
ORIGINAL: BraMas
I sure hope you meet the HP/TQ requirement to put an answer in this thread
I sure hope you meet the HP/TQ requirement to put an answer in this thread
ORIGINAL: GodAmGT00
It doesn't sound like the adjustment is right, if it's engaging a 1/3 of the way off the floor... At least from my experience, clutches are supposed to engage at the top 1/4, not the bottom 1/3..
JT
It doesn't sound like the adjustment is right, if it's engaging a 1/3 of the way off the floor... At least from my experience, clutches are supposed to engage at the top 1/4, not the bottom 1/3..
JT
Hehe, I guess I'll bow out then.. [8D]
JT
#22
RE: 2000GT4.6 - read this.
ORIGINAL: GodAmGT00
Gotcha, I must've misread that..
Regardless though, don't most heavy duty single plate clutches chatter a bit anyway??
JT
Gotcha, I must've misread that..
Regardless though, don't most heavy duty single plate clutches chatter a bit anyway??
JT
Thread
Thread Starter
Forum
Replies
Last Post