JT76

How low will the MAC LTheader and shorty H pipe combo hang? On my car the SLP catted X pipe hangs very very low (actually looks stupid from behind the car). Also, what is the difference between the catted shorty H and the prochamber? is there a cattd version of the prochamber for use with LT's? In NY cats are required to pass inspection, but i hear that thr prochamber sounds nasty.

2000GT4.6

Is the car stock height or lowered? I have never had any issues with scraping etc with my BBK LTs and o/r pipe.

JT76

Lowered with H&R sport springs. With my setup with the SLP catted X, and the springs, its literally like 2 inches off the ground and scrapes EVERYTHING. I tried to loosen everything and use a floor jack to try to get it up higher but, no luck, its just the way its made. If the MAC outfit will hug the body better i might opt for that and sell the X pipe (i kno a guy that will give me 300 for it)

JT76

bump

01GTstang

My setup tucks up good I think my mufflers hang lower than my headers or h pipe.

JT76

is your setup MAC?

kraze_e

how much was that setup. LTs and Hpipe

JimboGT01

I have that exact setup. I have a coilover front suspension and everything tucks nicely. i have not had much clearance problems. I would put the prochamber on if i could do it over, but dont know about the clearance on that.

oxfordgt

Does this help? MAC LT and Prochamber

[IMG]local://upfiles/37288/7ACCF6E947BC4D45947FA2988CFF4A12.jpg[/IMG]